Robin Gareus
b456060388
OSC API update for surfaces that always send float parameters.
2016-01-04 18:18:13 +01:00
Robin Gareus
d7078df3eb
amend 9e3299f for Mixbus
2016-01-03 20:39:47 +01:00
Paul Davis
9e3299f97d
change Controllable::set_value() API to include grouped control consideration.
...
This also removes Route::group_gain_control() and associated machinery.
Not yet tested with Mackie or other surfaces. More work to done to
start using the group capabilities, and also potentially to add
or derive more controls as RouteAutomationControls
2016-01-02 04:58:30 -05:00
Paul Davis
b8bb3eae47
generic MIDI support does not have its own request buffer factory, so be sure to initialize descriptor member to null
2015-12-29 05:41:59 -05:00
Paul Davis
e2f6c59639
add required request buffer factory for Wiimote
2015-12-28 11:13:04 -05:00
Paul Davis
0d9efc1148
redesign cross-thread registration/signalling system
...
This new design will work even when threads that need to receive
messages from RT threads are created *after* the RT threads. The
existing design would fail because the RT thread(s) would never
be known the later created threads, and so signals emitted by the
RT thread and causing call_slot() in the receiver would end up
being enqueued using a lock-protected list. The new design ensures
that communication always uses a lock-free FIFO instead
2015-12-28 10:14:17 -05:00
Len Ovens
85e12e8095
Mackie control: non-existent controls zero pot ring fix.
2015-12-19 11:50:13 -08:00
Len Ovens
07e4377d7b
NoOp: removed spaces, replaced with tabs.
2015-12-16 20:41:50 -08:00
Len Ovens
82f31fe624
Mackie Control: Re-enable view_mode display and make sure all text vanishes after timeout.
2015-12-16 14:38:21 -08:00
Len Ovens
8bb4ac0ac7
Fix MCP time display sometimes doesn't update to zero time on return to zero (shift-rew)
2015-12-16 12:24:10 -08:00
Robin Gareus
2f86d1b7dd
properly namespace hacked OSC callbacks, add some notes.
2015-12-16 18:17:38 +01:00
Ben Loftis
13d704b25d
redundant OSC commands to support TouchOSC and Lemur (vestigial float args)
2015-12-16 10:29:49 -06:00
Paul Davis
bff1fcbe48
mackie: restore access to trim and pan width control
...
Change from Evoral::Parameter to AutomationType caused this glitch
2015-12-16 11:05:40 -05:00
Paul Davis
3b872fb207
fix some merge issues from cherry-picking mackie changes from a mixbus repo
2015-12-16 06:31:06 -05:00
Paul Davis
93d5fe83c8
mackie: properly track lifetime of subview route; fix subview/potmode LED state mgmt
2015-12-16 06:01:55 -05:00
Paul Davis
a9a4cfb166
mackie: track compressor mode changes in display
2015-12-16 06:01:47 -05:00
Paul Davis
1152bf87a2
make vselect-press in subview mode act as a toggle for toggled controls
2015-12-16 06:01:38 -05:00
Paul Davis
a6da818bc4
add dynamics support to mackie control
2015-12-16 06:01:29 -05:00
Paul Davis
e3d0de3bf6
mackie: use new route API for universal access to pan/eq/dynamics parameters to provide panning and EQ control
2015-12-16 06:01:20 -05:00
Paul Davis
81179389d3
mackie: cleanup subview mode a little
2015-12-16 05:55:10 -05:00
Paul Davis
8ba8f1c0b0
fix cherry-pick conflict
2015-12-16 05:54:43 -05:00
Paul Davis
e302ce8662
only use 1/100th gap between markers if transport is stopped, to prevent repeated user action from adding multiple markers when stopped (mackie version)
2015-12-16 05:52:47 -05:00
Paul Davis
a1ef99b9b7
add beginnings of EQ and dynamics control to mackie for mixbus
2015-12-16 05:52:36 -05:00
Paul Davis
99764e946a
add UserA and UserB buttons to mackie button list
2015-12-16 05:52:27 -05:00
Ben Loftis
616e925322
tentative mcu panning for mixbus. hey, it compiles
2015-12-16 05:46:52 -05:00
Paul Davis
ff76ef86b4
faderport: long press on fader mode buttons switches fader automation to manual/off; off button is never sent an LED state message to avoid fader disabling
2015-12-14 14:42:12 -05:00
Paul Davis
e928edca32
faderport: fix setup of periodic callback (cut-n-paste error)
2015-12-14 14:41:38 -05:00
Paul Davis
d59739d728
faderport: add 100msec (10Hz) periodic update to facilitate automation playback
2015-12-14 13:28:31 -05:00
Paul Davis
40a352e8a1
faderport: disable automation state button mapping until (if ever) we can figure out why it kills the fader
2015-12-14 13:28:31 -05:00
Paul Davis
cc607fa161
fix DEBUG_TRACE messages from faderport that used MackieControlProtocol via cut-n-paste
2015-12-14 13:28:31 -05:00
Len Ovens
634321ba45
Fix Trim control range does not match control (issue #6696 )
2015-12-13 15:53:24 -08:00
Paul Davis
29416edbbf
remove debug output
2015-12-13 08:38:54 -05:00
Paul Davis
8bdab38d43
track add/remove of monitor and/or master busses in mackie support code.
...
Somehow fails to move master fader to correct position when monitor section is added
2015-12-13 08:33:09 -05:00
Len Ovens
0103de801a
Mackie Control, fix timecode sometimes won't update. Do full display if transport moves faster than 800%.
2015-12-11 12:57:24 -08:00
Ben Loftis
14ef6017f6
add a few new actions to Faderport menus, and reorganize them slightly
2015-12-10 17:25:29 -06:00
Len Ovens
548989fc75
Fix MCP send display value scaling.
2015-12-08 22:45:59 -08:00
Paul Davis
2d03db51cd
there is no "default" mackie device profile
2015-12-09 00:19:15 -05:00
Paul Davis
014f010489
if Mackie device profile name is empty, use a default name that makes sense and that will be rediscovered on next startup
2015-12-09 00:12:28 -05:00
Len Ovens
fcf20ee91a
Set vpot to the same range as the fader. Fixes trim from -16 to -20.
2015-12-08 19:30:57 -08:00
Paul Davis
6c99576250
faderport: stop trying to cache LED state (fixes various bugs); blink mute for muted-by-others; blink transport for speed != 1.0 && != 0
2015-12-08 11:09:50 -05:00
Ben Loftis
bbdd25205d
MCU: fix likely copypaste thinko in mcu panner knobs
2015-12-07 17:31:45 -06:00
Paul Davis
3d79e3c116
adjust generic MIDI surface support to (1) properly use boost::shared_ptr<Port> (2) detect connection changes
2015-12-07 12:38:17 -05:00
Paul Davis
2f48997dfb
remove unnecessary (?) conditional.
...
Given that we use "port" after the test, the test makes no sense
2015-12-07 12:38:17 -05:00
Ben Loftis
e3d2898c8d
more Faderport debugging, for windows
2015-12-04 18:11:05 -06:00
Ben Loftis
0a997f62cc
remove spurious printout
2015-12-04 17:32:23 -06:00
Paul Davis
e82cc88c6f
faderport: show current User button bindings in GUI
2015-12-03 21:45:41 -05:00
Paul Davis
a9ce37b7ac
faderport: fix long press behaviour, and fix ardour-only behaviour with user button when used as a modifier
2015-12-03 18:38:09 -05:00
Paul Davis
b07d86ac61
make faderport support report its port bundles as it should
2015-12-03 12:50:32 -05:00
Paul Davis
900f59dcde
faderport: generalized blink on/off code
2015-12-03 08:36:56 -05:00
Ben Loftis
43e5d639cc
Faderport: Punch indictor was being left on after blinking
2015-12-03 07:27:42 -06:00
